Star C3 Xentry Fault (1.2)-2.503.13003 Solution

Files c32s.dll and CAL 872 fix can solve Xentry/DAS Fault(1.2)-2.503.13003 “Initialization of diagnosis multiplexer failed”, said users with Chinese STAR C3 diagnostic tool.

Multiplexer:
Chinese Star C3

Error message:

“Fault(1.2)-2.503.13003

Initialization of diagnosis multiplexer failed
Possible causes:
The link between the diagnosis multiplexer an the
diagnostic socket is interrupted
The link between the diagnosis multiplrxer an the
diagnostic unit is interrupted.
The voltage supply at the diagnostic socket (circuit30
and(or) circuit31)is fault.
Note:
When using SDconnect, check the connection status
using the Toolkit. ”

Analysis from OBD2TOOL engineers:

“your STAR C3 mux is not connected in a proper condition. Check the connection first, with your car and laptop”

Disclaimer:

Solutions below are offered by users. TRY ON YOUR OWN RISK.

Solutions from ZCC

Software version: DAS 07/2011

Free download c32s.dll & CAL 872 fix (872 fix is copyrighted)

https://mega.nz/#!pkli3YIL!B6v0QFmLxFjb30N_VyoxNPizAnA_bkwqKRY8b1QvVJE

Finally I solved this problem.

It was really a complex coination of faulty hardware and software. I had a problem with that annoying c32s.dll file. I replaced it with the original 01/2011 one plus I used CAL 872 fix version 2 for DAS 07/2011 onwards. Only the c32s.dll solved the problem.

Solutions from fadiboujaoude

Software version: Das Xentry 01 2012

Free download oldc3.rar:

https://mega.nz/#!481xWILD!ZdYpw60KKfa5MkbmVnuUAFXQW5EFQNQf0TEVdcAt6hg

Solved my problem with the following tips…

download and set the das32R2(032012)
2. get the c32s.dll of das xentry 01 2012 and replace the existing one in F:/programme/Das/Bin
3.replace the HHTWin.ini located in c:\Windows :
(Copy And paste the lines below And exit and save HHTWin.ini File)
[STARTUP]
DX=515
DY=510
X=110
Y=0
BACK=21
SLAVE=PARTD2
DEBOUT=1
DEBLVL=6
SPC=02
SPCN=02
SPCP=02
SPCD=02
SPCV=02
[STARCONF]
BMPPATH=C:\USERDATA\Docs\HHT\
MAXFILES=200
DEBOUT=1
DEBLVL=6
[Debug]
HHTWIN.exe-modpath=F:\PROGRA~1\HHT\PKW\
HHTWIN.exe-szIniFile=C:\WINNT\HHTWIN.ini
HHTWIN.exe-lpszCmdLine=
HHTWIN.exe-Parameter=Inifile
HHTWIN.exe-szParamsPath=C:\userdata\CSD\Writefil\HHTWIN_Params.ini
HHTWIN.exe-CmdParams=
HHTWINX.DLL-modpath=F:\PROGRA~1\HHT\PKW\
HHTWINX.DLL-szIniFile=C:\WINNT\HHTWIN.ini

4.search on this forum for the file oldc3 … extract it .. then run it..

5. Done

this is the only way i got my DAS to read my multiplexer

Wish this help!

(PS: sorry for that i didn’t mention all the authors which i read their threads and posts but this because i read a lot and i did many and many tries to finally have the solution)