Demonstration: showing how to program a Kia Rondo 2017 remote key using Xhorse VVDI Key Tool and OBDSTAR X300 DP PLUS PAD2 .
Device required:
Original key
Xhorse VVDI Key tool
OBDSTAR X300 DP PLUS
Xhorse universal remote key 3-button
Connect X300 DP Plus host with vehicle via OBD socket
Select Diag Program->Immobilizer->Kia->Select from type->Remote->16 PIN->Type 1->Program Remotes
Turn on ignition switch and then turn off and remove key
If X300 DP asks press LOCK or UNLOCK for more than 1 s. Go to next step.
In VVDI Key Tool, select Remote/Smart Program->Remote key->Asia->Kia->Carens->Carens 433 2012DJ5804
Insert Xhorse remote key into detection coil
Write data
Write key success.
Then press LOCK or UNLOCK of the remote key for more than 1 second
Program success.
Press LOCK or UNLOCK button again
Program completed.
Test the remote control and start car.
Done.
Leave a Reply