Lonsdor K518 Test on BMW FEM/BDC Platform

This is a Lonsdor K518ISE Key Programmer test on BMW FEM/BDC platform,it test by k518 engineers.

Here is another article about K518 on BMW FEM/BDC:

Key Programmer Lonsdor K518ISE program BMW FEM BDC key even all key lost

Procedures:

Connect K518 to BMW FEM/BDC platform by OBD port.

Select “Immobilization”–> “BMW”–> “Select from type”–> “FEM/BDC”

Select “Read key info”

It will show the vehicle information include:VIN,SWFL,BTLD,CAFD/Type/Current key position and mileage

Click “OK” to continue

Click “OK” to continue

It show with below massage

Click “OK” to continue

Select “Make dealer key”

Please choose a blank location to generate a new key!

Choose location 3 and click “OK” to continue

Select “Use a working car key to generate a dealer key”

Then click “OK” to continue

Prepare a working car key,put the key into the car induction coil and press [OK] to continue.

Turn ignition on

Click “OK” to continue

Show below information

Put the new key in the car induction coil

Click “OK” to continue

Detecting new key

Learning key,please keep the key stable…

Learn key complete

New key have been added into location 3

Done!