Yanhua Mini ACDP with Module 19 Clone SH725XX Gearbox Guide

Yanhua ACDP module 19 is newly designed to work with mini ACDP for SH725XX gear clone, no soldering, no risk.

The test:

Gearbox type: BMW 7-dual-clutch (TEMIC DKG)

Connect Mini ACDP, Yanhua ACDP module 9, and gearbox properly as below

Run Mini ACDP APP

Go to BMW -> EGS -> DKG Clone (Supports E /F chassis)-> DKG436_Gen2 (TC1784)

Step 1: Identify

Start connecting devices, testing network, and loading hardware program

Make sure Mini ACDP and the gearbox have been connected properly

During the read/write data process, it is forbidden to unplug or plug the device and keep the device connected to the internet.

Identify the system info successfully

Then the data file is backed up automatically

Step 2: Full Backup Data

It reads the system info again and takes about 40s to read chip data.

When the chip data has been read out, then go to save the file

Step 3: Full Write Data

Disconnect Mini ACDP module 19 and the original gearbox, then connect to the new gearbox

Read the new chip data

Select the original chip data file to write in and wait the process to be done