How to set IP address for MB SD Connect C4 DoIP Diagnostic Scanner ？

August 2, 2019 Eva MB STAR 0

When you use new MB Star SD Connect C4 DoIP diagnostic scanner, you need set IP address first.Follow steps below shows how to configure SD Connect C4 DoIP multiplexer:

1

 

1.Go to local network connection

2

2.Press Properties

3

3.Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue

4

4.Enter IP address

IP address: 172.29.127.24

Subnet mask: 255.255.0.0

5

5.Click on Advanced

6

6.Click on Add to configure DoIP IP address

7

7.Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45)

8.Click on OK to finish configuration.

Related posts:

  1. How to Configure MB SD C4 DoIP
  2. DoIP W222 Diagnosis SDconnect C4 Or Xentry Connect C5
  3. How to enable DoIP communication for SD Connect C4 clone
  4. Different between MB SD Connect Compact 5 and MB SD C4 Star Diagnostic Tool

Be the first to comment

Leave a Reply

Your email address will not be published.


*