How to Adapt VAG ECU to Micronas / NEC cluster via Xhorse VVDI2?

June 5, 2021 Eva Auto ECU Programmer, Xhorse 0

Problem: I have Xhorse VVDI2 programmer, I want to adapt PCR 2.1 and I get “security access failed. operation not completed.”

Solution: this is how to adapt PCR and similar

How to adapt ECU to Micronas / NEC cluster via Xhorse VVDI2.

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-1 (2)

Read cluster IMMO data and copy to TXT file

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-2 (2)

Read IMMO data from ECU and paste to TXT file.

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-3 (2)

Go to adapt unit module

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-4 (2)

Select: ECU EDC16/17

Type manually CS and PIN data and Read.

and wait till data read.

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-5 (2)

Save power class

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-6 (2)

Paste VIN, CS, PIN, you read from cluster and click “Write”, confirm yes.

Completed.

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-7 (2)

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-8 (2)

To finish – go to cluster and change manually power class and write immo.

Vvdi2-Vag-Ecu-Adaptation-To-Cluster-9 (2)

Enjoy!

Related posts:

  1. How to create a BMW E92 second key with VVDI2 or CG Pro
  2. Xhorse Dolphin XP005 Cut a Ford Tibbe Key All Key Lost
  3. OBDSTAR Odo Master done 2013 VW NEC24C64 cluster calibration
  4. VVDI2 BMW 5.6.0 error need higher firmware support

Be the first to comment

Leave a Reply

Your email address will not be published.


*