How to Update VXDIAG Benz firmware

Allscanner VXDIAG Benz C6 multi tool released new firmware and driver update in September 2020. With the new update you can use the latest V2020.09 Xentry XODS software with the C6 multiplexer.

How to Update VXDIAG Benz firmware?
After install and configure Xentry XDOS software, install VX Manager and follow steps below:

1.Update VCX Plus firmware to 1.5.2.0
Press Firmware Update

2.Update DoIP firmware to 1.5.2
1) Update DoIP
2)Download firmware
3) Update
4) Finish DoIP firmware update

3. Install BENZ C6 new driver 3.0.8.306

How to configure VXDIAG Benz C6 VCI?
Follow steps below to configure VCI.

1. Open ConfigAssist, choose XENTRY Diagnosis VCI

2.Press Configure

3.Press Continue

4.Press Continue

5. Unable to detect StartKey, select Manually enter StartKey

6. Manual enter StartKey and save

7. Save StartKey sucess

8. Select Couple VCI (Connect VCI)

9. Configuration is done.
10. Restart computer

You will see C6 Benz icon and VCI number after connection.

How to use VXDIAG C6 Benz VCIRecovery?
The new firmware adds VCIRecovery function with which you can exchange old and new Xentry software versions.
Note: The latest firmware supports latest XENTRY Diagnosis 09/2020. If you want to use older version pre-2018, need to exchange between the VCIRecovery.

1. Run VCIRecovery on desktop and go to

C:\ProgramData\VCX\Apps\BENZC6

Select proper VCI version to run your software.

2. Press Update to run firmware update untill you succeeded.