Update SVCI 2020 Abrite Commander Firmware
One customer gave feedback that he cannot connect to the interface when using SVCI 2020 V38.1 software to read and write CS, MAC, PIN of ECU […]
Month: December 2020
(SOLVED) MICROPOD 2 “DEVICE IS NOT REGISTERED”
Micropod 2 Tech Support: “Device is not register” Hardware: Chrysler wiTech MicroPod 2 china clone Software: wiTech 17.04.27 Error message: “Registration is needed Device with serial […]
Vxdiag Benz C6 XENTRY EPC & WIS Software Activation
Please be informed: VXDIAG Benz C6 XENTRY EPC & WIS must be activated before using. And the following post is about VXDIAG Benz XENTRY EPC […]
Xhorse Dolphin XP005 Cut a Ford Tibbe Key All Key Lost
This is an operation demonstration of how Xhorse Dolphin XP005 cutting a Ford Tibbe key when all key lost. Firstly, connect Dolphin XP005 to Xhorse VVDI […]
How to update Autel IM508 and IM608 key programming tools
Received your new key programming table and before programming new keys, you must register it & update the new guys first. Then how to update? […]
How to Update VXDIAG Benz firmware
Allscanner VXDIAG Benz C6 multi tool released new firmware and driver update in September 2020. With the new update you can use the latest V2020.09 […]
Chevrolet PCM Reprogramming with GM tools and software
The powertrain control module (PCM) in your vehicle is the main computer controlling its various operating systems. For example, the PCM controls the engine, the […]
OBDSTAR X300 DP Plus Key Programming Odometer Correction Success& Failure
Here have collected some customer real feedback about which car can do or cannot do key programming and mileage correction using OBDSTAR X300 DP PLUS. […]
Autel MaxiIM IM608 Key Programming on BMW
This is my Autel MaxiIM IM608, OBD port and Toyota FJ. Now, let’s go inside my car and I’ll show you how to diagnose Toyota […]