Xhorse Dolphin XP005 Cut a Ford Tibbe Key All Key Lost

This is an operation demonstration of how Xhorse Dolphin XP005 cutting a Ford Tibbe key when all key lost.

Firstly, connect Dolphin XP005 to Xhorse VVDI Key Tool MAX via Bluetooth for smart control. Once connecting successfully, Dolphin XP005 machine will be ready.
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-1 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-2 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-3 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-4 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-5 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-1 (2) xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-2 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-3 (2)

Go to VVDI Key Tool MAX app, let’s start:

All key lost >> Ford >> Enter lock number “T0555”
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-4 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-5 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-6 (2)

M3 clamp and the key were already installed on Dolphin XP005 machine.

OK >> Cutting key >> Continue
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-6 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-7 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-8 (2)
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-9 (2)

Follow the prompts to turn over the key to A side 1 position, press “Continue”.

Dolphin XP005 starts cutting keys…

It prompts to turn over the key again, follow to operate, press “Continue”.
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-10 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-11 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-12 (2)

It will prompt several times to turn over the key, just do it as before.

The Dolphin XP005 machine is cutting around the key…
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-13 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-14 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-15 (2)

Wait until 100%, cutting key completed, press “OK” and take out the key.

The key has been cut all side around, try it on a Ford lock, it is successful to open!
Key cutting has done!
xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-16 (2)

xhorse-dolphin-xp005-cut-a-ford-tibbe-key-all-key-lost-17 (2)

This is how to use Dolphin XP005 Key Cutting Machine to cut a Ford Tibbe key when all key lost. It should be working with the VVDI Key Tool MAX app on a smart phone.

Add a Comment

Your email address will not be published. Required fields are marked *