I write this blog to share my problem about Autel MaxiSys Pro MS908P key erasure on 2000 ford focus and its solution with you.
Vehicle model and year:
2000 Ford Focus Z-Tech
Diagnostic tool used:
Autel Tools MaxiSYS MS908P
I intended to replace the PCM in my vehicle. With followed all the instruction for key erasure, the MaxiSYS MS908P on www.youobd2.com seemed to freeze at the 9 second make on the task bar.
The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working keys.
1 Download the beta version V6.12.10 to have a test.
2 Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed:
Turn the ignition key to position 0
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds
Cycle key2 in the ignition from OFF to RUN for at least 3 seconds.
Cycle key1 in the ignition from OFF to RUN for at least 3 seconds.
Two keys are programmed now.