We effectively read via trunk style the following ecu.. not a problem button strength source upon galletto.. endeavor to read when meaning appear turn off button hook up dreary wire in order to flag 31, strength upon source and remove dreary wire and media ALL RIGHT or perhaps following.. but Professional Diagnostic Tools will certainly read not a problem probably ough have got issue having Fgtech galletto, endeavor to read the item via natural modem cable ecu as shown upon image, pick out ecu via variety and look at ecu facts whenever the item functions, trunk style should as well..
natural style: We meant you must look at read the item upon common hook up most wire connections as shown around Fgtech galletto directions but do not hook up trunk cable and around galletto pick out around list normally renault-> thalia or perhaps We are not aware of what design you have, ECU should be suitable don’t take a look at model of a motor vehicle and endeavor to ECU username the item have to do the job.. On your own change usually around trunk style galletto read 256kb associated with expensive and via natural style merely 32kb.
i’ve tiongkok Fgtech galletto but We altered a nice selection of areas inside in order to totally do the job for the reason that I’ve issue having Kline read.. And in addition I’ve issue having ECU Siemens sirius32and We found in connector via galletto you cable -yellow- that’s to get L – tier has been desoldered and so We mended the item but it functions and We look at the item upon common, the item read ECU all right and so subsequently We endeavor to trunk style but it functions.
Adjust 270 OHM resistor IN ORDER TO 2700 OHM resistor
adjust 470 OHM resistor IN ORDER TO 4700 OHM resistor
and adjust enterprise via HEF40106BT IN ORDER TO HCF40106
as We published I’ve issue having Kline. canbus, bdm previously worked actually but k tier doesn’t work and so we adopted the following restore resolution and today the item functions!
A person enquired have to your dog prior to data files message via HEF40106BT IN ORDER TO HCF40106? or to HCF40106 soldering in fact it is geared up?
The result is definitely no. it is merely FORMER MATE SCHMITT ACTIVATE Inverters, it is merely enterprise, no facts inside. an individual acquire the following areas to get very little capital.. merely desolder aged and solder new compoments but it have to do the job look at the item.
In advance of restore, we provides kline issue we tested out ecu username, produce or perhaps read and galletto has been continually displaying malfunction ecu wakeup and after we altered the following factors the item functions very good.